Sale!

£1,248.00 £1,199.00

Description

Free yourself from the constraints of the factory ECU.

We’ve been mapping Link ECUs for a number of years now, with great results.

The Link G4+ ECUs can use a MAP sensor as the primary load input which means the MAF sensor can be removed. This is pretty much essential when wanting to run a top mount turbo. A Link can also run turbo’d throttle body engines, such as the RB26, with sophisticated 4D mapping.

This ECU gives us a large degree of flexibility with a variety of custom definable maps. The ECU can control boost (with gear and TPS boost targets), eradicating the need of a separate boost controller. We can program multiple map options making switching between maps straight forward & seamless. The Link also supports launch control, anti-lag and traction control.

There are a number of safety features available including over boost protection, air temp correction & closed loop fuelling.

We offer the ECU as a standalone product or a package for supply, installation and Mapping.

Horsham Developments Link Mapping

Please email, FB message or call us to find out more about or packages.

Below details from Link’s website:

The Link G4+ 350ZLink PlugIn fits the Nissan 350Z with the VQ35DE engine (2002-2006 only. Doesn’t fit the Revup engine or the VQ35HR engine).

Complete with a new enclosure, totally replacing the original unit.

Compatible with:

  • Nissan 350Z
  • Skyline V35
  • Infinity G35 with the VQ35DE engine.

The original ECU is removed, then the G4+ 350ZLink N350+ is installed. The original harness plugs in and the job is done, no wiring required and the original sensors are used.

The G4+ 350ZLink N350+ has an internal 4.0 bar MAP sensor. External MAP sensors are also supported.

Considerable gains in power across the complete RPM range can be achieved with the G4+ 350ZLink N350+ .

The G4+ 350ZLink N350+ allows full control over fuel, ignition timing, and all other engine functions.

The G4+ 350ZLink N350+ is supplied with a base map pre-loaded. Some final tuning will be required.

Installation is a breeze with no alteration of the factory wiring loom required. A built-in connector (or pins in some models) provides additional inputs and outputs such as oil pressure inputs or anti-lag / logging switches.
Factory features are supported – see Features for any exceptions.
Need more inputs and outputs?
The XS Expansion Loom offers the ability to add additional inputs & outputs on our range of plug-in ECUs.

Engine Configurations

Engine configurations are pre-set into PlugIn ECUs with a “start” base map.

Limits

  • Engine Temperature Dependent Soft and Hard RPM Limit
  • Engine Temperature Dependent Soft and Hard Boost Limit
  • Vehicle Speed Limit
  • System Voltage Limit
  • User Configurable RPM Limit based on external input

Fueling Adjustments

  • Up to 440 Zone Fuel Table with configurable load and RPM centres. Configurable X and Y Axis Parameters
  • Multiple Fuel Tables
  • Up to 6D Fuel Mapping
  • Injection Rate
  • Master Enrichment
  • Pre Crank Prime
  • Crank Enrichment
  • Post Start Enrichment
  • Warm Up Enrichment
  • Acceleration Enrichment
  • IAT Fuel Correction
  • Injector Deadtime Compensation
  • Overrun Fuel Cut
  • Idle Load Trims
  • Fuel Temperature Correction

Ignition Adjustments

  • Up to 440 Zone Ignition Table with configurable load and RPM centres. Configurable X and Y Axis Parameters
  • Closed Loop Knock Control. (Requires External Controller)
  • Crank Dwell Extension
  • Maximum Advance
  • AFR Table Correction
  • Spark Duration
  • Beginning / End Injection Definable
  • Dwell Time Table. Configurable X and Y Axis Parameters
  • Individual Cylinder Trim
  • Individual Cylinder Tables
  • Multiple Ignition Tables
  • Up to 6D Ignition Mapping
  • Individual Cylinder Ignition Trim
  • IAT Trim
  • Voltage Correction
  • ECT Trim
  • OEM Compatibility
  • CDI Compatibility

Triggering

  • Digital Trigger Decoding
  • Reluctor, Optical Proximity or Hall Sensors
  • Programmable filtering and arming thresholds
  • Configurable trigger patterns or preset triggering options.
  • Supports nearly all OEM trigger patterns and custom trigger arrangements

MotorSport Features

  • Antilag Group A/Group N
  • Launch/Traction Control
  • Flat Shifting
  • Stats Logging
  • Staged Injection

Auxiliary Output Options

  • Application specific. Output drives can be altered from OEM configuration. e.g. Purge control may be in the standard set-up. This can be re-wired and programmed in the Link Plug-in to control intercooler water spray (if added) for example.
    • Each Output independently configurable
    • Unused ignition and injection outputs available as auxiliary outputs
    • General Purpose Output
    • General Purpose PWM
    • Continuously Variable Valve Timing Control
    • Closed Loop Idle Speed Control (Solenoid or Stepper (4 & 6 Terminal))
    • Fuel Pump
    • Fuel Pump Speed Control
    • Engine Fan
    • Air Con Clutch
    • Air Con Fan
    • Intercooler Spray
    • Tacho
    • Check Engine Light
    • Purge Solenoid
    • Oxygen Sensor Heater
    • Switched Cam Solenoid

Variable Valve Timing (where applicable)

  • Up to 4 channel independent
  • Precision Closed Loop Control
  • 3D Tables with configurable X and Y axis controls
  • Preset or Custom Configuration
  • Supported Engines – 1UZFE VVTi; Subaru AVCS; EVO 9 VVT; BMW VANOS; Toyota 3SGE, 1ZZ, IJZ, 2NZ, 2JZ; Honda K20; Nissan VQ35; Ford V8; Holden V6

Processing

  • 40 MHz Specialised Engine Management Microprocessor
  • Ignition control to 0.1 degree, fuel to 0.01 ms
  • 32 Bit Calculation
  • 10 Bit ADC Resolution
  • 20000+ RPM
  • 32Mbit Non Volatile Flash

Inputs/Output

  • Totally application specific

Communications

  • Tuning Port USB Via Adapter Cable
  • Serial RS232
  • CAN

Analog Inputs

  • Each Channel Independently Configurable With Preset Or Custom Calibrations
  • Wideband O2 (From External Controller)
  • Boost Adjust Signal
  • Configurable Fault Detection Settings
  • Voltage (0-5V)
  • Pyro (From External Controller)
  • Throttle Position
  • Pressure (General Purpose, Fuel, Oil)
  • Air Flow Meter
  • MAP
  • Temperature (Coolant, IAT, General Purpose)
  • Throttle Position
  • Narrow Band O2

Boost Control

  • Engine Temp Correction
  • IAT Correction
  • Multiple Boost Tables
  • External Adjustment

Idle Control

  • Reliable And Accurate User Configurable Closed Loop Control
  • Solenoid Or Stepper Motor ISC Valve
  • Aircon, Engine Fan Or Power Steer Idle Up
  • Open Loop Control Mode For Diagnostics

Environment

  • Internal Temperature Range -10 – 85oC
  • Ambient Temperature Range -30 – 90oC
  • Voltage 8 – 22V
  • Operating Current 200mA
  • Electrical Protection On All Inputs And Outputs

PCLink

  • Adjust ALL Parameters In Real Time
  • Mouse Or Keyboard Operation
  • Tuning
  • QuickTune – Automated Fuel Self Tuning
  • Logging Analysis
  • Diagnostic Information
  • Built In Help
  • Definable Screen Layouts
  • View Over 300 Possible Run Time Parameters

Physical

  • Dimensions And Weights Change According The The Specific Plug-In Supplied
  • Connector : Same As Factory ECU

Package Contents

  • G4+ PlugIn ECU
  • MAP Sensor For Applications Where No Factory MAP Sensor Fitted
  • Anti Static Strap
  • Wiring And Installation Instructions

Additional Accessories (Purchased Separately)

  • Intake Air Temperature Sensor

– 3/8 NPT
– Bosch Push In
– 14mm (Aluminium Or Steel Mounting Bosses To Suit)

  • Throttle Position Sensor
  • 1,2 or 3 Channel Link Igniter
  • Narrowband Oxygen Sensor
  • Wideband O2 Controller & Sensor
  • Injector Ballast Resistor Packs

– 1 x 1R (6 x <6R injectors)
– 2 x 1R (12 x <6R injectors)
– 1 x 4R7 (1 x <6R injectors)
– 2 x 4R7 (2 x <6R injectors)
– 1 x 2R2 (1 x <3R injectors)
– 2 x 2R2 (2 x <3R injectors)
– 4 x 4R7 (4 x <6R injectors)
– 6 x 4R7 (6 x <6R injectors)

Manufacturing Standard

  • ISO 13485

– See more at: http://dealers.linkecu.com/NGTTPlus#sthash.pttUhbYD.dpuf

Additional information

Weight 2 kg